CHARACTERIZATION OF COMPOSITES MADE OF HDPE AND FURNITURE INDUSTRY SAWDUST. PART II: DOUBLE-SCREW EXTRUSION

Authors

  • Éverton Hillig UFSM
  • Setsuo Iwakiri
  • Clovis Roberto Haselein
  • Otávio Bianchi
  • Débora Moraes Hillig

DOI:

https://doi.org/10.5902/198050983237

Keywords:

composites, HDPE, sawdust.

Abstract

In this work, wood plastic composites made of HDPE and different types of wood sawdust generate at furniture industries are characterised. The equipment used was a 19 mm co-rotating twin-screw extruder, complementing previous studies where the composites were mixed using a single-screw extruder. Temperatures of 180oC were applied at the five heating zones, rotating at 150 rpm with a flux of 1 kg.h-1. Residues of MDF, of loblolly pine and of eucalypt wood were used, and were mixed into the HDPE with a coupling agent (anhydride maleic). Physical characterization of the composites was performed by differential scanning calorimetry (DSC) and by scanning electronic microscopy. In addition, the mechanical properties of tension, static bending and impact were analysed, according to ASTM D638, D790 and D256. All types of sawdust acted as a nucleate agent, since the composites showed a crystallinity index higher than pure HDPE. Also, it was observed that the type of sawdust influenced fibre’s dispersion in the polymeric matrix. The mechanical tests showed differences in the properties of the composites made of different types of sawdust. In general, inclusion of MDF sawdust resulted in composites with higher bending strength and impact work than those containing eucalypt and pine. Comparing results obtained using a single-screw extruder and values obtained in this study, it can be concluded that the properties of the wood are more effectively transferred to the composite using a double-screw extruder.

Downloads

Download data is not yet available.

References

AMERICAN SOCIETY FOR TESTING AND MATERIALS. Standard test methods for detemining the Izod Pendulum Impact resistance of plastics, D 256 – 97. West Conshohocken, PA, 2000.

AMERICAN SOCIETY FOR TESTING AND MATERIALS. Standard test method for Tensile properties of plastics, D 638 – 99. West Conshohocken, PA, 2000.

AMERICAN SOCIETY FOR TESTING AND MATERIALS. Standard test method for Flexural properties of unreinforced and reinforced plastics and electrical insulating materials, D 790 – 99. West Conshohocken, PA, 2000.

BALASURIYA, P. W.; MAI, Y. -W. Mechanical properties of wood flake-polyethylene composites. Part I: effects of processing methods and matrix melt flow behaviour. Composites Part A: Applied Science and Manufacturing, v 32, p. 619-629, 2001.

BLEDZKI, A. K. et al., A comparison of compounding processes and wood type for wood fibre - PP composites. Composites Part A: Applied Science and Manufacturing, v. 36, p. 789-797, 2005.

BILLMEYER JR., F. W. Textbook of polymer science. 2nd ed. USA: John Willey & Sons, 1971. 598 p.

BRASKEM. Folha de dados do Polietileno de Alta Densidade HC7260LS-L. Disponível em http://www.braskem.com.br/upload/portal_braskem/pt/produtos_e_servicos/folha_dados/HC7260LSL_por.pdf. Acesso em: 8 de setembro de 2010.

CARASCHI, J. C.; LEÃO, A. L. Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, v. 24, n. 6, p. 1599-1602, 2002.

CHEMTURA CORPORATION. Tecnical information Polybond® 3009. Disponível em http://www.chemtura.com/deployedfiles/staticfiles/businessunits/polymer_additives-en-us/TechnicalDataSheets/files/Polybond%203009%20TDS.pdf/Polybond%203009%20TDS.pdf. Acesso em: 8 de setembro de 2010.

CLEMONS C. M.; IBACH, R. E. Efects of processing method and moisture history laboratory fungal resistance of wood-HDPE composites. Forest Products Journal. v. 54, n. 4, p. 50-57, 2004.

FONSECA, F. M. C. Desenvolvimento e caracterização de compósitos à base de Polietileno de Alta Densidade (PEAD) reciclado e fibras vegetais. Belo Horizonte, 2005. 133 p. Dissertação (Mestrado em Engenharia de Materiais)-Universidade Federal de Ouro Preto, Ouro Preto, 2005.

HILLIG, É. et al. Caracterização de compósitos produzidos com polietileno de alta densidade (HDPE) e serragem da indústria moveleira. Revista Árvore, v. 32, n. 2, p.299-310, 2008.

ROBIN, J. J.; BRETON, Y. Reinforcement of recycled polyethylene with wood fibers heat treated. Journal of Reinforced Plastics and Composites, v. 20, n. 14, p. 1253-1262, 2001..

ROSE, J. Equipment overcomes - some knotty problems. Modern Plastics,March, p. 40-41, 2002.

RUCH, J. et al. Transformação direta facilita a moldagem plásticos reforçados com fibras naturais. Plástico Industrial, n. 68, p. 44-63, abr. 2004.

SAHEB, D. N.; JOG, J. P. Natural fiber polymer composites: a review. Advances in Polymer Technology. v. 18, n. 4, p. 351-363, 1999.

SAIN, M. et al. Interface Modification and Mechanical Properties of Natural Fiber–Polyolefin Composite Products. Journal of Reinforced Plastics and Composites, v. 24, n. 2, p. 121-130, 2005

SELKE, S. E.; WICHMAN, I. Wood fiber polyolefin composites. Composites Part A: Applied Science and Manufacturing, v. 35, p. 321-326. 2004

STARK, N. M. Wood fiber derived from scrap pallets used in polypropylene composites. Forest Products Journal, v. 49, n. 6, p. 39-46, Jun. 1999.

STARK, N. M.; MATUANA, L. M.; CLEMONS, C. M. Effect of Processing Method on Accelerated Weathering of Woodflour-HDPE Composites. In: INTERNATIONAL CONFERENCE ON WOODFIBER-PLASTIC COMPOSITES (AND OTHER NATURAL FIBERS), 7., 2003, Madison. Proceedings... Madison: Forest Products Society, 2003. p. 79-87.

STARK, N. M.; ROWLANDS R. E. Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites. Wood fiber science . 35, p. 167-174, 2003.

TECNOLOGIA PRODUZ MADEIRA PLÁSTICA. Plástico Moderno, n. 315, 2000. Disponível em http://www.plastico.com.br/revista/pm315/extrusoras4.htm. Acesso em: 8 de setembro de 2010.

VIANNA, W. L., CORREA, C. A., RAZZINO, C. A. Efeitos do tipo de poliestireno de alto impacto nas propriedades de compósitos termoplásticos com farinha de resíduo de madeira. Polímeros: Ciência e Tecnologia, v. 14, n. 5, p. 339-348, 2004.

WOLCOTT, M. P. Production methods and platforms for wood plastics. Non-Wood Substitutes for Solid Wood Products Conference. Melbourne, Oct. 2003.

YAM, K. L. et al. Composites from compounding wood fibers with recycled high density polyethylene. Polymer Engineering & Science. v. 30, n. 11, p. 693-699, 1990.

YAMAJI, F. M. Produção de compósito plástico-madeira a partir de resíduos da indústria madeireira. 2004. 182 f. Tese (Doutorado em Engenharia Florestal)-Universidade Federal do Paraná, Curitiba, 2004.

YOUNGQUIST, J. A. Wood-based composites and panel products. Wood Handbook: wood as an engineering material. Washington: Forest Products Society, 1999. 428 p.

Published

2011-06-30

How to Cite

Hillig, Éverton, Iwakiri, S., Haselein, C. R., Bianchi, O., & Hillig, D. M. (2011). CHARACTERIZATION OF COMPOSITES MADE OF HDPE AND FURNITURE INDUSTRY SAWDUST. PART II: DOUBLE-SCREW EXTRUSION. Ciência Florestal, 21(2), 335–347. https://doi.org/10.5902/198050983237

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 4 5 6 > >> 

Similar Articles

You may also start an advanced similarity search for this article.