Physical and mechanical properties of <i>Cunninghamia lanceolata</i> (Lamb.) Hook. wood planted in Brazil
DOI:
https://doi.org/10.5902/1980509871209Keywords:
Density, Mechanical resistence, Shrinkage, Alternative speciesAbstract
Cunninghamia lanceolata (Lamb.) Hook. is described in the literature as a species with good stem shape and fast growth, being a potential alternative for the implantation of new forest stands in Brazil. The study aimed to evaluate the physical and mechanical properties of C. lanceolata wood, growing in the state of Santa Catarina, Brazil, in order to delineate its potential at 24 years of age as a source of raw material for the production of sawn wood of small dimensions and structural purpose. Three trees were felled to determine the basic density and apparent specific density (12%, 0% and green wood), as well as the dimensional stability and mechanical properties in static bending, shear and compression parallel to the grain. The wood of C. lanceolata presented basic density classified as light and lower than that recorded for individuals of the same species growing in China, while the parameters related to the dimensional stability of the wood were similar. In general, the species planted in Brazil showed lower resistance and stiffness in the static bending test, and higher compressive and parallel shear resistance than that presented by the same species of plantations in China. The differences observed in relation to the studies used for comparison with the same species can be attributed, in addition to the place of cultivation, to the higher density of plantations used in the stands implanted in the country of origin.
Downloads
References
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS - ABNT. NBR 7190: Projeto de Estrutura de Madeira. Rio de Janeiro: ABNT, 1997.
BAO, F. C. et al. Differences in wood properties between juvenile wood and mature wood in 10 species grown in China. Wood Science and Technology, Berlin, v. 35, p. 363-375, 2001.
COMISIÓN PANAMERICANA DE NORMAS TÉCNICAS - COPANT. COPANT 555: Metodo de
Ensayo de Flexión Estática. [S.l]: COPANT, 1973.
COMISIÓN PANAMERICANA DE NORMAS TÉCNICAS - COPANT. COPANT 463: Metodo de
determinación del cizallamiento paralelo al grano. [S.l]: COPANT, 1972a.
COMISION PANAMERICANA DE NORMAS TÉCNICAS - COPANT. COPANT 464: Metodo de determinación de la compresión parallel al grano. [S.l]: COPANT, 1972b.
DA, T. B.; HA, L. T. N. A Review of Cunninghamia lanceolata (Lamb.) Hook: A Recent Update and
Potential Application in Vietnam. Vietnam Journal of Agricultural Sciences, Vietnam, v. 3, n. 4, p. 892-902, 2020.
DOBNER JÚNIOR, M. et al. Aspectos dendrométricos e silviculturais de um povoamento de Cunninghamia lanceolata no sul do Brasil. Floresta, Curitiba, v. 47, n. 1, p. 1-9, 2017.
DOBNER JÚNIOR, M. et al. Caracterização do lenho e efeito de variáveis meteorológicas no crescimento de Cunninghamia lanceolata no sul do Brasil. Scientia Forestalis, Piracicaba, v. 49, n. 130, p. 1-11, 2021.
DUAN, H. et al. Variation in the growth traits and wood properties of chinese fir from six provinces of Southern China. Forests, Switzerland, v. 7, n. 192, p. 1-12, 2016.
DURLO, M. A.; MARCHIORI, J. N. C. Tecnologia da Madeira: retratibilidade. Santa Maria: UFSM/ CEPEF/ FATEC, 1992. 33p. (Série Técnica, 10).
EMPRESA BRASILEIRA DE PESQUISA AGROPECUÁRIA – EMBRAPA. Zoneamento ecológico para plantios florestais no Estado de Santa Catarina. Curitiba: Centro Nacional de Pesquisa de Florestas, 1988. 113p. (Documentos, 21).
FAROOQ, T. H. et al. Chinese fir (Cunninghamia lanceolata) a green gold of China with continues decline in its productivity over the successive rotations: a review. Applied Ecology and Environmental Research, Budapest, Hungary, v. 17, n. 5, p. 11055-11067, 2019.
FUNG, L. E. Wood properties of New Zealand-grown Cunninghamia lanceolata. New Zealand Journal of Forestry Science, New Zealand, v. 23, n. 3, p. 324-338, 1993.
FUNG, L. E. A literature review of Cunninghamia lanceolata. The Commonwealth Forestry Review,
Oxford, v. 73, n. 3, p. 172-192, 1994.
GUANG, Y. et al. Study on physical and mechanical properties of Cunninghamia konishii Wood. Journal of Southwest Forestry University, [S.l],v. 34, n. 1, p.106-109, 2014.
GUO, J. et al. Influences of provenance and rotation age on heartwood ratio, stem diameter and radial variation in tracheid dimension of Cunninghamia lanceolata. European Journal of Wood and Wood Products, [S.l], v. 76, p. 669–677, 2018.
INTERNATIONAL ASSOCIATION OF WOOD ANATOMISTS COMMITTEE - IAWA. List of microscope
features for hardwood identification. IAWA Bulletin, Netherlands, Leiden, v. 10, n. 3, p. 219 -332, 1989.
LIANG, H. W. et al. Wood physical mechanical properties of Taiwania flousiana compared to Cunninghamia lanceolata for plantation development. Journal of Zhejiang Foresty College, Zhejiang, v. 25, n. 2, p. 137-142, 2008.
MELCHIORETTO, D; ELEOTÉRIO, J. R. Caracterização, classificação e comparação da madeira de Pinus patula, P. elliottii e P. taeda através de suas propriedades físicas e mecânicas. In: CONGRESSO REGIONAL DE INICIAÇÃO CIENTIFICA E TECNOLÓGICA, 23., 2003, Blumenau. Anais [...]. Blumenau: FURB, 2003.
MELO, R. R. de et al. Caracterização física e mecânica da madeira de Araucaria angustifolia (Bertol.) Kuntze. Revista Brasileira de Ciências Agrárias, Recife, v. 5, n. 1, p. 67-73, 2010.
MISSIO, A. L. et al. Propriedades mecânicas da madeira resinada de Pinus elliottii. Ciência Rural, Santa Maria, v. 45, n. 8, p.1432-1438, 2015.
OLIVEIRA, F. L. de et al. Propriedades da madeira de Pinus taeda L. em função da idade e da posição radial na tora. Revista do Instituto Florestal, São Paulo, v. 18, n. único, p. 59-70, 2006.
THOMÉ, V. M. R. et al. Zoneamento Agroecológico e Socioeconômico de Santa Catarina. Florianópolis: Epagri, 1999. 1000 p.
TRIANOSKI, R. et al. Avaliação da estabilidade dimensional de espécies de Pinus tropicais. Floresta e Ambiente, Seropédica, v. 20, n. 3, p. 398-406, 2013.
TRIANOSKI, R. et al. Avaliação das propriedades mecânicas da madeira de espécies de Pinus tropicais. Scientia Forestalis, Piracicaba, v. 42, n. 101, p. 21-28, 2014.
VIVIAN, M. A. et al. Características da madeira de Cunninghamia lanceolata (Chinese fir). Scientia Forestalis, Piracicaba, v. 49, n. 131, p. 1-13, 2021.
XIUQIN, L. et al. Variations in wood density and mechanical properties of 32 chinese fir clones. Forest research, China, v. 7, n. 3, p. 259-262, 1994.
WANG, Y. et al. Wood mechanical properties and their correlation with microstructure in Chinese fir clones. IAWA Journal, [S.l], v. 42, n. 4, p. 497-506, 2021.
WREGE, M. S. et al. Atlas climático da região sul do Brasil: Estados do Paraná, Santa Catarina e Rio Grande do Sul. 2 ed. Brasília, DF: Embrapa, 2012. 334 p.
YIN, Y. et al. Mechanical properties assessment of Cunninghamia lanceolata plantation wood with three acoustic-based nondestructive methods. Journal Wood Science, Japan, n. 56, p. 33-40, 2010.
YOU, R. et al. Variation in wood physical properties and effects of climate for different geographic sources of Chinese fir in subtropical area of China. Scientifc Reports, London, v. 11, n. 4664, p. 1-11, 2021.
ZAQUE, L. A. M.; FERREIRA, M. D.; MELO, R. R. Variação radial e longitudinal da massa específica básica da madeira de Araucaria angustifolia com diferentes idades. Pesquisa Florestal Brasileira, Colombo, v. 38, , p. 1-5, 2018.
ZHOU, X. et al. Desiccation treatment and endogenous IAA levels are key factors influencing high frequency somatic embryogenesis in Cunninghamia lanceolata (Lamb.) Hook. Frontiers in Plant Science, Suíça, v. 8, n. 2054, p. 1-15, 2017.
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Ciência Florestal
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
A revista CIÊNCIA FLORESTAL reserva-se o direito de realizar, nos originais, alterações de ordens normativas, ortográficas e gramaticais, com vistas a manter o padrão escolar da língua, mas respeitando o estilo dos autores. As provas finais podem ou não ser enviadas aos autores.
