MECHANICAL PROPERTIES OF FLAKEBOARD MADE FROM PINE, EUCALYPTS AND WATTLE WOOD1

Authors

  • Éverton Hillig UFSM
  • Clovis Roberto Haselein
  • Elio José Santini

DOI:

https://doi.org/10.5902/198050981701

Keywords:

flakeboard, mixture of species, tannin-formaldehyde.

Abstract

In this work the mechanical properties of flakeboard, made with  pine (Pinus elliottii Engelm), eucalypts (Eucalyptus grandis W. Hill ex-Maiden) and wattle (Acacia mearnsii De Wild) wood particles, were analysed. To segregate the wood specific gravity effects, three-replication blocks, with 1.21, 1.32 and 1.43 compression ratios were installed. Flakeboard of fifteen mixtures, where each specie participated with 0, 25, 50, 75 and 100% of the ovendry weight proportion, were manufactured with particles of  90 x 20 x 0.6 mm average size and 8 percent resin solids content. The analysis were made by means of correlation and adjusted mathematical models, obtained using simple or multiple regression, between the production variables and the proportion of each specie in the mixture. The results found for modulus of rupture and elasticity were above the international standards; however, the flakeboard showed lower values of internal bond, demonstrating lower bond quality. As a general conclusion, the use of mixed wood species had advantage over that of single wood species, mainly because of the distinct wood specific gravity. The best mixture, however, can be established considering the purposes of the final product and the raw material availability.

Downloads

Download data is not yet available.

References

AKERS, L. E. Particle board and hardboard. Great Britain : Balckie & Son Ltda, 1966. v. 4.

ALBERTO, M. M. M.; KEINERT JUNIOR, S. Efeito da geometria das partículas e da densidade, sobre as propriedades de painéis estruturais “waferboards” - Parte I - Efeitos sobre as propriedades de resistência. In: CONGRESSO FLORESTAL BRASILEIRO, 7., CONGRESSO FLORESTAL PANAMERICANO, 1., 1993, Curitiba. Anais ... Curitiba : SBS - SBEF, 1993. 783 p. p. 613-618.

ANDERSON, A. B. Bark extracts as bonding agent for particleboard. ACS-American Chemical Society symposium series wood technology: chemical aspects. n. 43, p. 235-242, 1977.

AMERICAN SOCIETY FOR TESTING AND MATERIALS. Standard test methods for evaluating properties of wood-base fiber and particle panel materials, D 1037 – 93. Philadelphia, PA, 1995.

AMERICAN SOCIETY FOR TESTING AND MATERIALS. Standard methods of testing small clear specimens of timber, D 143 – 94. Philadelphia, PA, 1995.

BRITO, E. O. A viabilidade de utilização de espécies de Pinus para produção de chapas de composição estruturais waferboards. 1984. 104 p. Dissertação (Mestrado em Engenharia Florestal) - Universidade Federal do Paraná, Curitiba.

BROWN, H. P.; PANSHIN, A. J.; FORSITH, C. C. Textbook of wood technology. New York: McGraw-Hill, 1952. 2 v.

GEORGE J.; ZOOLAGUD, S. S.; RANGARAJU, T. S. Preliminary investigations on the use of tannin adhesives for particle board manufacture. IPIRI Journal, v. 6, n. 1, p. 37-41, 1976.

GINZEL, W.; PERAZA C. Tecnologia de tableros de particulas. Madrid: Instituto Forestal de Investigaciones y Experiencias, 1966. 187 p.

HASELEIN, C. R. Análise de parâmetros para a fabricação de chapas de partículas aglomeradas de madeira de eucalipto (Eucalyptus grandis W. Hill ex- Maiden) e embaúba (Cecropia sp.). 1989. 75 p. Dissertação (Mestrado em Ciência Florestal) - Universidade Federal de Viçosa, Viçosa.

IWAKIRI, S.; KLOCK, U.; ROCHA, M. P. et al. Mistura de espécies na produção de chapas de partículas estruturais “waferboard”. Agrárias, v. 14, n. 1/2, p. 107-114, 1995.

KOLLMANN, F. F. P., KUENZI, E. W., STAMM, A. J. Principles of wood science and technology II: wood based materials. Berlin: Springer-Verlag Berlin, 1975. 703 p.

LYNAM, F. C. Factors influencing the properties of wood chipboard. Wood, n. 24, p. 18-20, 1959.

MACEDO, A. R. P.; ROQUE, C. A. L. Painéis de madeira. Painel.doc. Disponivel em: . Acesso em 1998.

MOSLEMI, A. A. Particleboard. Carbondale: Southern Illinois University Press, 1974. 2 v.

MITLIN, L. Basic raw material for particleboard manufacture. Particleboard manufacture and application. Kent: Pressmedia Sevenoaks, 1968. p. 9-25.

NAKAMURA, R. M.; SOBRAL FILHO, M. Aglomerado de mistura de espécies tropicais da Amazônia. Brasília: IBDF, 1982. 7 p.

NOCK, H. P.; RICHTER, H. G. Tópicos de tecnologia da madeira: adesão e adesivos. Curitiba: Universidade Federal do Paraná, 1978. 93 p.

PIMENTA A. S., et al. Produção de chapas de flocos com adesivos fenólicos à base de alcatrão e creosoto de eucalipto. Revista Árvore, v. 20, n. 3, p. 343-366, 1996.

PIZZI, A.; SCHARFETTER, H.; KES, E.W. Adhesives and techniques open new possibilities for the wood processing industry. 1. Experience with tannin based adhesives. National Timber Res. Inst., v. 39, n. 3, p. 85-89, 1981. Resumo publicado no Forest Products Abstracts, 1982.

PLACE, T. A.; MALONEY,T. M. Internal bond and moisture response properties of three-layer, wood bark boards. Forest products journal, v.27, n.3, p. 50-54, 1977.

ROQUE, C. A. L. Painéis de madeira aglomerada: SET805.doc. Disponível em: . Acesso em 1998.

SANTANA, M. A. E.; COPPENS, H. A.; PASTORE JUNIOR, F. Adesivo de tanino-formaldeído para fabricação de compensado e aglomerado para uso interior e exterior. Brasília : IBDF, 1979. 19 p.

SANTANA, M. A. E.; PASTORE JUNIOR, F. Adesivos de tanino-formaldeído para aglomerados: influência do pH de refluxo e do pH de utilização nas propriedades do adesivo. Brasília : IBDF, 1980. 12 p.

STORCK, L.; LOPES, S. J. Experimentação II. 2. ed. Santa Maria : UFSM – CCR – Departamento de Fitotecnia, 1998. 205 p.

VITAL, B. R. Effects of species and panel densities on properties of hardwood particleboard. Madison, 1973. 111 p. Thesis (Master of Science - Forestry) - University of Wisconsin, Madison.

WILSON, J. B., KRAHMER, R. L. Particleboard: microscopic observations of resin distribution and board fracture. Forest Products Journal, v. 26, n. 11, p. 42-45, 1976.

Published

2002-03-30

How to Cite

Hillig, Éverton, Haselein, C. R., & Santini, E. J. (2002). MECHANICAL PROPERTIES OF FLAKEBOARD MADE FROM PINE, EUCALYPTS AND WATTLE WOOD1. Ciência Florestal, 12(1), 59–70. https://doi.org/10.5902/198050981701

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 4 5 6 > >>