COMPARATIVE ANALYSIS OF PHYSICAL AND MECHANICAL PROPERTIES OF WOOD FROM THREE PLANTATION SOFTWOODS
DOI:
https://doi.org/10.5902/19805098397Keywords:
Wood properties, parana pine, slash pine, loblolly pine.Abstract
Woods from plantation stands of parana, slash and loblolly pines, thinned at least once, were tested with the objective of comparing physical and mechanical properties. Five threes from each specie were harvested from selected stands. The stems were bucked into logs and then transported to the sawmill cooperating in this study. The logs were processed into planks, which were air seasoned, and then cut into pieces according to ASTM standards. Although the average strength of parana pine was slightly larger than the two other pines, significant differences were found only in the tests of static bending (modulus of elasticity and tension at the proportional limit), compression parallel to the grain (maximum crushing strength, modulus of elasticity and tension at the proportional limit) and hardness (cross-section). The properties were not different for slash and loblolly pines, except in tension perpendicular to the grain, where the strength of loblolly pine was higher than the others. No differences were found for specific gravity and shrinkage among the species.
Downloads
References
ASTM. American Society for Testing and Materials. Standard methods of testing small clear specimens of timber, D 143-94. Philadelphia, 1995a.
ASTM. American Society for Testing and Materials. Test methods for specific gravity of wood and wood-base materials., D 2395-93. Philadelphia, 1995b.
ASTM. American Society for Testing and Materials. Test methods for direct moisture content measurement of wood and wood-base materials., D 4442-92. Philadelphia, 1995c.
ASTM. American Society for Testing and Materials. Practice for sampling forest trees for determination of clear wood properties., D 5535-94. Philadelphia, 1995d.
BIBLIS, E.J.; BRINKER, R.; CARINO, H.F. et al. Effect of stand age on flexural properties and grade compliance of lumber from loblolly pine plantation timber. For. Prod. J., Madison, v. 43, n.2, p. 23-28, feb. 1993.
DURLO, M.A. Determinação de variáveis para caracterização de Pinus elliottii com finalidade estrutural. In: CONGRESSO FLORESTAL ESTADUAL 6., 1988. Nova Prata, RS. Anais ... Nova Prata, 1988. p. 1097 - 1113.
IBAMA. Instituto Brasileiro do Meio Ambiente e dos Recursos Naturais Renováveis. Amostragem e propriedades físico-mecânicas de madeiras amazônicas. Brasília, 1993. 103p.
KELLISON, R.C. Characteristics affecting quality of timber from plantations, their determination and scope for modification. In: IUFRO WORLD CONGRESS 17., 1981, Kyoto. Proceedings ... Kyoto, 1981. p. 77-87.
LADRACH, W.E. Control of wood properties in plantations. In: IUFRO WORLD CONGRESS 18., 1986, Ljubljana. Proceedings ... Ljubljana, 1986. p. 369-379.
McALISTER, R.H.; CLARK III, A. Effect of geographic location and seed source on the bending properties of juvenile and mature loblolly pine. For. Prod. J., Madison, v. 41, n. 9, p. 39-42, Sept. 1991.
PEARSON, R.G.; GILMORE, R.C. Characterization of the strength of juvenile wood of loblolly pine (Pinus taeda). For. Prod. J., Madison, v. 21, n. 1, p. 23-30, May 1971.
PEARSON, R.G.; GILMORE, R.C. Effect of fast growth rate on the mechanical properties of loblolly pine. For. Prod. J., Madison, v. 30, n. 5, p. 47-54, May 1980.
STUMPP, E. Valores físicos-mecânicos de Pinus spp. em comparação com Araucaria angustifolia. In.: CONGRESSO FLORESTAL ESTADUAL 7., 1992, Nova Prata, RS. Anais ... Nova Prata, 1992. p. 1413-1420.
TOMASELLI, I. Comparação da qualidade da madeira de Araucaria angustifolia e Pinus spp. produzida em reflorestamentos. In.: ENCONTRO DA IUFRO SOBRE PROBLEMAS FLORESTAIS DO GÊNERO ARAUCARIA, 1979, Curitiba. Anais ... Curitiba, 1980. p. 286-291.
WOOD HANDBOOK: Wood as an engineering material. Washington, DC. US. Department of Agriculture, Forest Products Laboratory, 1987. (revisado). (Agriculture Handbook, 72).