Analytical study of the dimensional stability of tropical brazilian wood species
DOI :
https://doi.org/10.5902/1980509865389Mots-clés :
Longitudinal shrinkage, Tangential shrinkage, Tropical Brazilian woodRésumé
Brazil owns a large vegetal covering and the best utilization of these materials requires physical and mechanical characterization procedures. Equations found in the literature make easier the wood properties determination. At this context, well known authors developed the equation βl = βt/23, being βl and βt the longitudinal and tangential shrinkage percentages, for βl estimation based on the βt value specially for wood species from the Northern hemisphere. This paper aims to investigate the accuracy of this equation for fifteen tropical Brazilian wood species covering the entire range of hardwood strength classes according to the Brazilian Normative ABNT NBR7190. The average experimental values of βl and βt were 7.71% (CV = 26,71%) and 0.73% (CV = 38,76%), respectively. The non-parametric Kruskal-Wallis ANOVA refuted the hypothesis of equivalence between theoretical and experimental βl values (p-value = 0.0000). A linear regression model fitted to experimental values provided βl = βt/9,84 as optimal solution (p-value = 0.0000, R2 = 47,23%). According to results it is possible to conclude that the value of longitudinal shrinkage percentage of tropical Brazilian wood species is statistically 2,34 times greater than the value found in the literature, which impacts the design of timber structures procedures increasing the internal stresses in timber structural elements.
Téléchargements
Références
ABNT. Projeto de estruturas de madeira ABNT- Técnicas NBR 7190. Associação Brasileira de Normas Técnicas, [s. l.], p. 107, 1997.
ALMEIDA, T. H.; ALMEIDA, D. H.; ARAUJO, V. A.; SILVA, S. A. M.; CHRISTOFORO, A. L.; LAHR, F. A. R. Density as Estimator of Dimensional Stability Quantities of Brazilian Tropical Woods. BioResources, [s. l.], v. 12, n. 3, p. 6579–6590, 2017. Available in: https://doi.org/10.15376/biores.12.3.6579-6590
ALMEIDA, T. H. de; ALMEIDA, D. H.; CHRISTOFORO, A. L.; CHAHUD, E.; BRANCO, L. A. M. N.; LAHR, F. A. R. Density as Estimator of Strength in Compression Parallel to the Grain in Wood. International Journal of Materials Engineering, [s. l.], v. 6, n. 3, p. 67–71, 2016. Available in: https://doi.org/10.5923/j.ijme.20160603.01
ALMEIDA, T. H.; ALMEIDA, D. H.; AQUINO, V. B. M.; CHAHUD, E.; PINHEIRO, R. V.; BRANCO, L.A.M.N.; ALMEIDA, J. P B.; CHRISTOFORO, A. L.; LAHR, F. A. R. Investigation of the Fiber Saturation Point of Tropical Brazilian Wood Species. BioResources, v. 15, n. 3, p. 5379-5387, 2020. Available in: https://doi.org/ 10.15376/biores.15.3.5379-5387
BRITO, L. D.; CHRISTOFORO, A. L.; SEGUNDINHO, P. G. A.; LAHR, F. A. R.; CALIL JUNIOR, C. Historic “HAUFF” Timber Roofs in Poços de Caldas in Brazil. International Journal of Materials Engineering, [s. l.], v. 6, n. 3, p. 113–118, 2016. Available in: https://doi.org/10.5923/j.ijme.20160603.09
BUCHANAN, A.; CARRADINE, D.; JORDAN, J. Performance of engineered timber structures in the Canterbury earthquakes. Bulletin of the New Zealand Society for Earthquake Engineering, [s. l.], v. 44, n. 4, p. 394–401, 2011. Available in: https://doi.org/10.5459/bnzsee.44.4.394-401
CALIL JUNIOR, C.; LAHR, F. A. R.; DIAS, A. A. Dimensionamento de elementos estruturais de madeira. 1. ed. Barueri, São Paulo: Manole, 2003.
CASSIANO, C.; SOUZA, A. P.; STANGERLIN, D. M.; PAULINO, J.; MELO, R. R. Seasonality and estimates of the equilibrium moisture content of amazonian woods in Sinop, mato grosso state, Brazil. Scientia Forestalis, [s. l.], v. 41, n. 100, p. 457–468, 2013.
FERREIRA, C. F.; D’AYALA, D.; CABO, J. L. F.; DÍEZ, R.Numerical modelling of historic vaulted timber structures. Advanced Materials Research, [s. l.], v. 778, n. May 2014, p. 517–525, 2013. Available in: https://doi.org/10.4028/www.scientific.net/AMR.778.517
FUEYO, J. G.; DOMÍNGUEZ, M.; CABEZAS, J. A. Contact shear stresses in dowel-type joints with expansive kits of timber structures. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, [s. l.], v. 231, n. 1, p. 140–149, 2017. Available in: https://doi.org/10.1177/0954406216656215
GEBHARDT, C.; KALISKE, M. Reliable simulation of timber structures by combined load and displacement control. Engineering Computations (Swansea, Wales), [s. l.], v. 32, n. 3, p. 766–778, 2015. Available in: https://doi.org/10.1108/EC-04-2014-0069
GENOESE, A. GENOESE, A.; FORTINO, S.; HRADIL, P.A numerical approach for the hygro-thermal monitoring of timber structures under environmental conditions. Advanced Materials Research, [s. l.], v. 778, p. 786–793, 2013. Available in: https://doi.org/10.4028/www.scientific.net/AMR.778.786
GIANOLI, A; FURRER, R. Contrasting approaches to load-bearing timber structures. In: STRUCTURES AND ARCHITECTURE. [S. l.]: CRC Press, 2016. p. 1516–1523. Available in: https://doi.org/10.1201/b20891-211
HOLZER, S.M. Analysis of historical timber structures. In: STRUCTURAL ANALYSIS OF HISTORICAL CONSTRUCTIONS: ANAMNESIS, DIAGNOSIS, THERAPY, CONTROLS. [S. l.]: CRC Press, 2016. p. 1203–1210. Available in: https://doi.org/10.1201/9781315616995-163
ITTO. Biennial review and assessment of the world situation 2017-2018. Yokohama, Japan: INTERNATIONAL TROPICAL TIMBER ORGANIZATION, 2018.
KOLLMANN, F. F. P.; CÔTÉ, W. A. Principles of Wood Science and Technology. Berlin, Heidelberg: Springer Berlin Heidelberg, 1968. Available in: https://doi.org/10.1007/978-3-642-87928-9
LUKACS, I.; BJORNFOT, A.; TSALKATIDIS, T.; TOMASI, R. Structural redundancy in cross-laminated timber buildings. In: 2016. WCTE 2016 - World Conference on Timber Engineering. [S. l.: s. n.], 2016.
MARIÑO, R. A. CARREIRA, X. C.; FERNÁNDEZ, M. E.; FERNANDEZ-RODRIGUEZ, C. Durability of timber structures in agricultural and livestock buildings. Biosystems Engineering, [s. l.], v. 104, n. 1, p. 152–160, 2009. Available in: https://doi.org/10.1016/j.biosystemseng.2009.06.009
PARISI, M. A.; PIAZZA, M. Seismic strengthening and seismic improvement of timber structures. Construction and Building Materials, [s. l.], v. 97, p. 55–66, 2015. Available in: https://doi.org/10.1016/j.conbuildmat.2015.05.093
R PROJECT. Software R 4.2.1. Vienna, Austria, 2022.
ŠMAK, M.; STRAKA, B. Development of new types of timber structures based on theoretical analysis and their real behaviour. Wood Research, [s. l.], v. 59, n. 3, p. 459–470, 2014.
SOUSA, H. S.; LOURENÇO, P. B.; NEVES, L. C. Safety evaluation of timber structures through probabilistic analysis. Advanced Materials Research, [s. l.], v. 133–134, p. 337–342, 2010. Available in: https://doi.org/10.4028/www.scientific.net/AMR.133-134.337
STEEGE, H. T.VAESSEN, R. W.; CÁRDENAS-LOPEZ, D.; SABATIER, D.; ANTONELLI, A.; OLIVEIRA, S. M.; PITMAN, N. C. A.; JORGENSEN, P. M.; SALOMÃO, R. P.The discovery of the Amazonian tree flora with an updated checklist of all known tree taxa. Scientific Reports, [s. l.], v. 6, p. 1–15, 2016. Available in: https://doi.org/10.1038/srep29549
STOLF, D. O.; BERTOLINI, M. S.; CHRISTOFORO, A. L.; PANZERA, T. H.; RIBEIRO FILHO, S. L. M. LAHR, F. A. R. Pinus caribaea var. hondurensis Wood Impregnated with Methyl Methacrylate. Journal of Materials in Civil Engineering, [s. l.], v. 29, n. 6, p. 05016004, 2017. Available in: https://doi.org/10.1061/(asce)mt.1943-5533.0001830
WACKER, J. P. BRASHAW, B. K.; WILLIAMSON, T. G.; JONES, P. D.; SMITH, M. S.; HOSTENG, T. K.; STRAHL, D. L.; COOMBE, L. E.; GOPU, V. Service life assessment of timber highway bridges in USA climate zones. WCTE 2014 - World Conference on Timber Engineering, Proceedings, [s. l.], n. 1, p. 2021, 2014.
Téléchargements
Publié-e
Comment citer
Numéro
Rubrique
Licence
(c) Tous droits réservés Ciência Florestal 2022
Cette œuvre est sous licence Creative Commons Attribution - Pas d'Utilisation Commerciale 4.0 International.
A CIÊNCIA FLORESTAL se reserva o direito de efetuar, nos originais, alterações de ordem normativa, ortográfica e gramatical, com vistas a manter o padrão culto da lingua, respeitando, porém, o estilo dos autores.
As provas finais serão enviadas as autoras e aos autores.
Os trabalhos publicados passam a ser propriedade da revista CIÊNCIA FLORESTAL, sendo permitida a reprodução parcial ou total dos trabalhos, desde que a fonte original seja citada.
As opiniões emitidas pelos autores dos trabalhos são de sua exclusiva responsabilidade.
