Visual and mechanical classification of the specie <i>Cryptomeria japonica</i> D. Don for using as glued laminated timber
DOI:
https://doi.org/10.5902/1980509837084Keywords:
Elasticity, Structural purpose, Visual gradeAbstract
The objective was to evaluate the mechanical properties, the visual classification influence of Cryptomeria japonica D. Don at the mechanical performance to use it as glulam structural elements, comparing with the minimum requirements demanded by the Brazilian Standard ABNT NBR 7190 (1997) and European Standard EN 338 (2006). The tests for the characterization of the physical and mechanical properties of solid timber followed the recommendations of COPANT 461 (1972), 464 (1972), 555 (973) for density of timber, parallel compression to grain and bending, respectively; and ABNT NBR 7190 (1997) for the shear strength. The classification of the 80 laminate of timber with dimension of 6.0 x 1.5 x 220.0 cm were made by visual classification according to the American Standard ASTM D245 (2006) and by the modulus of elasticity – MOE (ASTM D4761 (2013)). Altogether, 20 beams of GLULAM were made, these formed by the combination of the laminated classified in the visual grades: Control (clear laminate), T1 (clear and special structural - SE), T2 (S1, S2, S3) and T3 (clear, SE, S1, S2, S3), the beams were evaluated by bending, tension perpendicular to grain and shear strength in the glued line. The results indicated the species as solid wood does not have the minimum resistance to be classified as C-20 by the ABNT NBR 7190 (1997), but the species was classified as structural grade in the C-16 by the EN 338 Standard. The GLULAM beams showed the minimum demanded values to the C-20 structural class according to the ABNT NBR 7190 (1997). The using of laminated with visually classified knots did not decrease the glulam beams strength when comparing to the beams made with laminated without knots.
Downloads
References
ALMEIDA, D. H. et al. Caracterização completa da madeira da espécie amazônica Paricá (Schizolobium amazonicum Herb) em peças de dimensões estruturais. Revista Árvore, Viçosa, MG, v. 37, n. 6, p. 1175-1181, 2013. DOI: 10.1590/S0100-67622013000600019.
ALMEIDA, D. H. et al. Madeira Laminada Colada (MLC) da espécie Paricá. Revista da Madeira, Curitiba, v. 12, n. 30, p. 71-82, 2011.
AMERICAN SOCIETY OF TESTING AND MATERIALS.ASTMD 245: Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber. West Conshohocken, 2006. 16 p.
AMERICAN SOCIETY OF TESTING AND MATERIALS.ASTMD 4761: Mechanical properties of Lumber and Wood-Base Structural Material. Philadelphia, 2013. 11 p.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR 7190: Projetos de estruturas de madeira. Rio de Janeiro, 1997. 107 p.
ASSOCIATION FRANCAISE DE NORMALISATION. NFB 5-32: Essai de cisaillement. Paris, 1942.
BODIG, J.; JAYNE, B. A. Mechanics of wood and wood composites. Nova York: Krieger Publishing, 1993. 712 p.
CARNEIRO, M. E.; BITENCOURT, E.; MUNIZ, G. I. B. Qualidade da madeira de Cryptomeriajaponica D. Don. Revista Floresta, Curitiba, v. 39, n. 4, p. 913-920, 2009. DOI: 10.5380/RF. V39I4.16328.
CARPANEZZI, A. A. et al. Zoneamento ecológico para plantios florestais no Estado de Santa Catarina. Curitiba: EMBRAPA, 1988.
CARREIRA, M. R.; DIAS, A. A.; CALIL JUNIOR, C. Proposta de método para classificação visual estrutural de coníferas. Madeira, [s. l.], v. 5, n. 13, p. 23, 2004.
COMISIÓN PANAMERICANA DE NORMAS TÉCNICAS. COPANT 461: Método de determinación del peso específico aparente. Buenos Aires, 1972. 6 p.
COMISIÓN PANAMERICANA DE NORMAS TÉCNICAS. COPANT 464: Método de determinación dez la compresión axil o paralelo al grano. Buenos Aires, 1972. 4 p.
COMISIÓN PANAMERICANA DE NORMAS TÉCNICAS. COPANT 555: Método de Ensayo de Flexión Estática. Buenos Aires, 1973. 10 p.
CUNHA, A. B.; MATOS, J. L. M. Determinação do módulo de elasticidade em madeira laminada colada por meio de ensaio não destrutivo (''stress wave timer''). Revista Árvore, Viçosa, MG, v. 34, n. 2, p. 345-354, 2010. DOI: 10.1590/S0100-67622010000200018.
EUROPEAN STANDARD. EN 338: Structural timber - strength classes. Brussels, 2016. 16 p.
FONTE, A. P. N. et al. Propriedades físicas e químicas da madeira de cerne e alburno de Cryptomeria japonica. Revista de Ciências Agroveterinárias, Lages, v. 16, n. 3, p. 277-285, 2017. DOI: 10.5965/223811711632017277.
IWAKIRI, S. et al. Avaliação da resistência de juntas coladas da madeira de Cryptomeria japonica e Sequoia sempervirens com diferentes adesivos. Scientia Forestalis, Piracicaba, v. 43, n. 105, p. 19-26, 2015.
LUKACEVIC, M.; FÜSSL, J. Numerical simulation tool for wooden boards with physically based approach to identify structural failure. European Journal of Wood and Wood Products, Berlin, v. 72, n. 4, p. 497-508, 2014.
MIOTTO, J. L.; DIAS, A. A. Produção e avaliação de vigas de madeira laminada colada confeccionadas com lâminas de eucalipto. Revista Tecnológica, Maringá, nesp, p. 35-45, 2009.
MOORE, J. R.; COWN, D. J. Corewood (juvenile wood) and its impact on wood utilization. Current Forestry Reports, [s. l.], v. 3, n. 2, p. 107-118, 2017. DOI: 10.1007/s40725-017-0055-2.
TEREZO, R. F.; SZÜCS, C. A. Análise de desempenho de vigas em madeira laminada colada de Paricá (Schizolobium Amazonicum Huber ex. Ducke). Scientia Forestalis, Piracicaba, v. 38, n. 87, p. 471-480, 2010.
VIDAURRE, G. G. et al. Lenho juvenil e adulto e as propriedades da madeira. Revista Floresta e Ambiente, Seropédica, v. 18, n. 4, p. 469-480, 2011. DOI: 10.4322/FLORAM.2011.066.
YANG, T-H. et al. Effect of laminate configuration on the modulus of elasticity of glulam evaluated using a strain gauge method. Journal of Wood Science, Singapura, v. 53, n. 1, p. 31-39, 2007. DOI: 10.1007/S10086-006-0818-Z.
