Esta es un versión antigua publicada el 2021-03-22. Consulte la versión más reciente.

Canola oil as an alternative quenchant for the AISI 8640 steel

Autores/as

DOI:

https://doi.org/10.5902/2236117055350

Palabras clave:

Microstructure, Phase transformation, AISI 8640 steel, Canola oil, Quenching

Resumen

AISI 8640 is one of the most used steel in the manufacturing industry due its wide range of applicability and properties. The quenching process is commonly applied in parts made of this steel in order to enhance some properties, such as strength and hardness. Petroleum derived oils are the most common quenchants, however this kind of quenchant is considered to be non-biodegradable, toxic to the health and environment, as well as, not renewable. In the present study, canola oil presented the same efficiency than a conventional petroleum derived oil in the quenching process of AISI 8640 steel billets with diameter of 25.4mm.

Descargas

Los datos de descargas todavía no están disponibles.

Biografía del autor/a

Leonardo Pratavieira Deo, Federal University of Lavras, Lavras- MG

D.Sc. (2015) and Master (2011) in Materials Science and Engineering and undergraduation in Exacts Sciences in Physics (2008), Maths (2009) and Chemistry (2010) at USP-São Carlos. Adjunct Professor at Federal University of Lavras since 2016 at Engineering Department.

Artur Mariano de Sousa Malafaia, Universidade Federal de São João Del Rei, São João del-Rei - MG

D.Sc. (2013) and Master (2009) in Materials Science and Engineering and undergraduation in Mechanical Engineering (2006) at USP-São Carlos. Adjunct Professor at Federal University of São João Del Rei since 2013 at Mechanical and Industrial Engineering Department.

Citas

BARROQUEIRO, B. et al. Multiscale analysis of heat treatments in steels: Theory and practice. Finite Elements in Analysis and Design, [S. l.], v. 114, p. 39–56, 2016. Disponível em: https://doi.org/https://doi.org/10.1016/j.finel.2016.02.004

CALLISTER JR., William D.; RETHWISCH, David G. Ciência Engenharia de Materiais - Uma Introdução. 8a. ed. Brasil: LTC, 2012. E-book.

CASEIRO, J. F.; OLIVEIRA, J. A.; ANDRADE-CAMPOS, A. Thermomechanical modelling strategies for multiphase steels. International Journal of Mechanical Sciences, [S. l.], v. 53, n. 9, p. 720–733, 2011. Disponível em: https://doi.org/https://doi.org/10.1016/j.ijmecsci.2011.06.004

CHANDLER, Harry. Heat Treater’s Guide: Practices and Procedures for Irons and Steels. 2nd. ed. [S. l.]: ASM International, 1995. E-book.

EL-KINAWY, O.; EL-HAMIDI, M.; ABDALLAH, R. Utilization of non edible oils in lubrication as substitution to mineral oils. Journal of Applied Sciences Research, [S. l.], v. 9, n. 6, p. 3492–3496, 2013.

ERHAN, Sevim Z.; SHARMA, Brajendra K.; PEREZ, Joseph M. Oxidation and low temperature stability of vegetable oil-based lubricants. Industrial Crops and Products, [S. l.], v. 24, n. 3, p. 292–299, 2006. Disponível em: https://doi.org/10.1016/j.indcrop.2006.06.008

IACOVIELLO, Francesco et al. Damaging Micromechanisms Characterization in Pearlitic Ductile Cast Irons. Procedia Materials Science, [S. l.], v. 3, p. 295–300, 2014. Disponível em: https://doi.org/https://doi.org/10.1016/j.mspro.2014.06.051

KRAUSS, George. Martensite in steel: strength and structure. Materials Science and Engineering: A, [S. l.], v. 273–275, p. 40–57, 1999. Disponível em: https://doi.org/https://doi.org/10.1016/S0921-5093(99)00288-9

SILVEIRA, Franco da et al. Tratamento Térmico de Têmpera em Aço ABNT 8640: análise das Propriedades Mecânicas. HOLOS, [S. l.], v. 2, p. 49–59, 2018. Disponível em: https://doi.org/10.15628/holos.2018.5614

SIMENCIO OTERO, R. L. et al. Vegetable Oils as Metal Quenchants: A Comprehensive Review. Materials Performance and Characterization, [S. l.], p. MPC20160112, 2017. Disponível em: https://doi.org/10.1520/MPC20160112

Descargas

Publicado

2021-03-22

Versiones

Cómo citar

Deo, L. P., & Malafaia, A. M. de S. (2021). Canola oil as an alternative quenchant for the AISI 8640 steel. Revista Eletrônica Em Gestão, Educação E Tecnologia Ambiental, 25, e4. https://doi.org/10.5902/2236117055350

Número

Vol. 25 (2021): REGET - 2021 - Continuous Publication

Sección

ENVIRONMENTAL THECNOLOGY

Licencia

DECLARATION