Influence of moisture content on physical and mechanical properties of <i>Calophyllum</i> sp wood
DOI:
https://doi.org/10.5902/1980509870446Palabras clave:
Catanudo, Moisture content, Linear modelResumen
Due to its excellent resistance to traction and compression, wood is regularly used in furniture, window frames and in structures and sealing of homes and buildings. Due to the anisotropy and complexity of the material, its properties vary depending on its intrinsic anatomical characteristics and external factors, such as species, moisture content, acting requests, among others. The Brazilian standard provides linear models for estimating and correcting all strength and stiffness properties as a function of the moisture content of the wood. However, due to its characteristics, there may not be a linear variation of the physical and mechanical properties in relation to the moisture content. Thus, this research aims to evaluate and analyze the influence of moisture content on 15 properties of Calophyllum sp. The reliability of the Brazilian standard equation for correcting strength and stiffness values as a function of humidity (U% to 12%) was evaluated, in addition to analyzing, through ANOVA, whether there is a change in the properties when they are at the saturation point of the fiber and 12% moisture. Of the 15 properties analyzed, 4 did not change, contrary to the linear models set out in the Brazilian standard. In addition, it was possible to note that the Brazilian standard can estimate with an error of up to 76% when correcting the humidity to 12%.
Descargas
Citas
ALMEIDA, T. H.; SOUZA, A. M.; MARTINS, A. S. M.; CHRISTOFORO, A. L.; ALMEIDA, D. H.; LAHR, F. A. R. Effect of service temperature on shear strength of Pinus wood for roof structures. Acta Scientiarum. Technology, v. 40, n. 6, 2018. DOI: https://doi.org/10.4025/actascitechnol.v40i1.30913
ALMEIDA, T. H.; ALMEIDA, D. H.; ARROYO, F. N.; ARAÚJO, V. A.; CHAHUD, E.; BRANCO, L. A. M. N.; PINHEIRO, R. V.; CHRISTOFORO, A. L.; LAHR, F. A. R. Time of exposure at 60°C service temperature: influence on strength and modulus of elasticity in compression parallel to the grain of hardwood species. BioResources, v. 14, n. 1, p. 207-219, 2019. DOI: https://doi.org/10.15376/biores.14.1.207-219
AQUINO, V. B. M.; FREITAS, M. V. P.; VASCONCELOS, C. Q.; ALMEIDA, J. P. B.; ARROYO, F. N.; RODRIGUES, E. F. C.; CHRISTOFORO, A. L.; ALMEIDA, D. H.; SILVA, S. A. M.; SILVA, D. A. L.; PINHEIRO, R. V.; LAHR, F. A. R. Physical and mechanical characterization of Planchonella Pachycarpa wood species for use in structural purpose. Wood Research, v. 66, n. 2, p. 267-276, 2021. DOI: https://doi.org/10.37763/wr.1336-4561/66.2.267276
BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS. NBR 7190: Design of wooden structures. Rio de Janeiro, p. 107. 1997. (in Portuguese)
BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS. NBR 7190: Design of wooden structures. Rio de Janeiro, p. 107. 2022. (in Portuguese)
CHRISTOFORO, A. L.; ARROYO, F. N.; SILVA, D. A. L.; PANZERA, T. H.; LAHR, F. A. R. Full characterization of Calycophyllum multiflorum wood specie. Engenharia Agrícola, v. 37, n. 4, 2017. DOI: https://doi.org/10.1590/1809-4430-Eng.Agric.v37n4p637-643/2017
COUTO, N. G.; ALMEIDA, J. P. B.; GOVONE, J. S.; CHRISTOFORO, A. L.; LAHR, F. A. R. Relationship between shear strength and compressive strength parallel to grains of hardwoods. Ambiente Construído. v. 20, n. 4, p. 319-327, 2020. DOI: https://doi.org/10.1590/s1678-86212020000400475 (in Portuguese)
DIAS, F. M.; ALMEIDA, T. H.; ARAÚJO, V. A.; PANZERA, T. H.; CHRISTOFORO, A. L.; LAHR, F. A. R. Influence of the apparent density on the shrinkage of 43 tropical wood species. Acta Scientiarum. Technology, v. 41, n. 7, 2016. DOI: https://doi.org/10.4025/actascitechnol.v41i2.30947
FRAGIACOMO, M.; MENIS, A.; MOSS, P. J.; CLEMENTE, I.; BUCHANAN, A. H. Numerical and experimental thermal-structural behavior of laminated veneer lumber (LVL) exposed to fire. Proceedings […], WCTE 2010, v. 4, n. 3, p. 3047-3056, 2010. ISSN 9781622761753. DOI: https://doi.org/10.1260/2040-2317.1.3.145
IBA. Brazilian Tree Industry: Annual Report IBA 2020. 2020. Available at: https://iba.org/datafiles/publicacoes/relatorios/relatorio-iba-2020.pdf. Accessed on: July 20, 2021. (in Portuguese)
LAHR, F. A. R.; CHRISTOFORO, A. L.; VARANDA, L. D.; CHAHUD, E.; ARAÚJO, V. A.; BRANCO, L. A. M. N. Shear and longitudinal modulus of elasticity in wood: relations based on static bending tests. Acta Scientiarum, v. 39, n. 4, p. 433-437, 2017. DOI: https://doi.org/10.4025/actascitechnol.v39i4.30512
LAHR, F. A. R.; ARROYO, F. N.; RODRIGUES, E. F. C.; ALMEIDA, J. P. B.; AQUINO, V. B. M.; WOLENSKI, A. R. V.; SANTOS, H. F.; FERRAZ, A. L. N.; CHAHUD, E.; MOLINA, J. C.; PINHEIRO, R. V.; CHRISTOFORO, A. L. Models to estimate longitudinal compressive strength of Brazilian hardwood based on apparent density. BioResources, v. 16, n. 1, p. 1373-1381, 2021. DOI: https://doi.org/10.15376/biores.16.1.1373-1381
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2023 Ciência Florestal
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial 4.0.
A CIÊNCIA FLORESTAL se reserva o direito de efetuar, nos originais, alterações de ordem normativa, ortográfica e gramatical, com vistas a manter o padrão culto da lingua, respeitando, porém, o estilo dos autores.
As provas finais serão enviadas as autoras e aos autores.
Os trabalhos publicados passam a ser propriedade da revista CIÊNCIA FLORESTAL, sendo permitida a reprodução parcial ou total dos trabalhos, desde que a fonte original seja citada.
As opiniões emitidas pelos autores dos trabalhos são de sua exclusiva responsabilidade.
