Growth of <i>Eucalyptus urophylla</i> seedlings produced in conventional and water collection trays in degradable tube and polypropylene systems

Authors

DOI:

https://doi.org/10.5902/1980509873734

Keywords:

Alternation of clones, Clone quality, Tray, Degradable tube degradation, Aerial and root biomass

Abstract

The nursery revolution in the 80s occurred with polyethylene tubes, which are still widely used, even with some negative points. The demand to reduce costs in the nursery has driven the evolution of seedling production techniques and products, such as degradable tubes and water collection trays. This study aimed to evaluate under nursery conditions the growth phase of Eucalyptus urophylla clones produced in polyethylene tube systems and degradable material with different occupation levels. The occupancy of 27% and 50% of flat polyethylene trays with 176 cells and 100% of water collector trays with 40 cells were tested. The height, diameter, survival rate, Dickson’s Quality Index (DQI), shoot dry matter, and root system dry matter were evaluated 70 days after the experiment implementation. According to the results obtained, the degradable tube and the water collector tray favored the development of the clones in terms of height and DQI. The tubes and trays used in the study did not statistically influence shoot dry matter, root system dry matter, and the total dry matter of the clones. The treatment that used degradable tubes and the water collection tray presented the best mean values of the evaluated growth parameters.

Downloads

Download data is not yet available.

Author Biographies

Letícia Duron Cury, São Paulo State University

Forest Engineer, Doctor in Agronomy - Energy in Agriculture

São Paulo State University, Botucatu, SP, Brazil

 

Leonardo França da Silva, Federal University of Viçosa

Agronomist, Doctor in Agricultural Engineering

Federal University of Viçosa, Viçosa, MG, Brazil

 

Victor Crespo de Oliveira, São Paulo State University

 Master degree (Agricultural Engeneering)

Engenheiro Agrícola pela Universidade Federal de Lavras. Mestre em Engenharia Agrícola pela Universidade Federal de Viçosa. É atualmente pesquisador de doutorado em Engenharia Agrícola na Universidade Estadual Paulista (UNESP). Possuí experiência internacional no desenvolvimento de projetos científicos e atua diretamente no desenvolvimento de pesquisas na área de Construções Rurais e Ambiência.

 

Marcela de Mello Arthur, São Paulo State University

Undergraduate student in Bioprocess and Biotechnology Engineering

São Paulo State University, Botucatu, SP, Brazil

Sergio Augusto Rodrigues, São Paulo State University

Statistical, Doctor in Agronomy - Energy in Agriculture

São Paulo State University, Botucatu, SP, Brazil

José Mauro Santana da Silva, Federal University of São Carlos

Forest Engineer, Doctor in Agronomy - Irrigation and Drainage

Federal University São Carlos, São Carlos, SP, Brazil

Saulo Philipe Sebastião Guerra, Universidade Estadual Paulista (Unesp)

Forest Engineer, Doctor in Agronomy - Energy in Agriculture

São Paulo State University, Botucatu, SP, Brazil

References

ALFENAS, A. C.; ZAUZA, E. A. V.; MAFIA, R. G.; ASSIS, T. F. Clonagem e doenças do eucalipto. 2ed. Viçosa: UFV, 2009. p.442.

CLIMATE. Botucatu Clima. 2022. Available in: https://pt.climate-data.org/america-do-sul/brasil/sao-paulo/botucatu-4227/. Accessed in: 09 Mar. 2022.

CUNHA, A. R.; MARTINS, D. Classificação Climática para os municípios de Botucatu e São Manuel – SP. Revista Irriga, Botucatu, v. 14, n. 1, p. 1-11. 2009.

CONTI, A. C.; REIS, R. C. S.; CONTI, C.; DANIEL NETO, R. F.; ARANTES, A. K. Análise do desenvolvimento e da viabilidade econômica do plantio de mudas de árvores em tubetes biodegradáveis. Revista de Tecnologias, Ourinhos, v. 5, n. 1, p. 113-121, jun. 2012.

DIAS, B. A. S. Análise comparativa de tubetes biodegradáveis e de polietileno na produção de mudas de Paratecoma Peroba (Record &Mell) Kuhlm. 2011. 84p. Tese (Doutorado em Ciência Florestal) - Universidade Federal de Viçosa, Viçosa, 2011.

DICKSON, A.; LEAF, A. L.; HOSNER, J. F. Quality appraisal of white spruce and white pine seedling stock in nurseries. Forest Chronicle, v. 36, n. 1, p. 10-13, 1960.

ELOY, E.; CARON, B. O.; SCHMIDT, D.; BEHLING, A.; SCHWERS, L.; ELLI, E. F. Avaliação da qualidade de mudas de Eucalyptus grandis utilizando parâmetros morfológicos. Floresta, Curitiba, v. 43, n. 3, p. 373-384, set. 2013.

FARIA, J. C. T.; LOPES, D. A.; LYRA, G. B.; MELO, H. C.; MELO, L. A. Manejo da densidade de plantas durante a produção de mudas em viveiro. Ciência Florestal, Santa Maria, v. 29, n. 3, p. 1187-1198, set. 2019. 7.

FREITAS, T. A. S.; BARROSO, D. G.; CARNEIRO, J. G. A.; PENCHEL FILHO, R. M.; SOUZA, L. S. Efeito de deformação e poda das raízes de mudas de eucalipto sobre o crescimento no campo. Floresta, Curitiba, v. 39, n. 2, p. 355-363, jun. 2009.

GÓMEZ, J. J. V.; MACIEL, J. L. M.; SILVA, M. R. Bandejas coletoras x bandejas tradicionais na produção de mudas de Eucalyptus grandis Hill ex Maiden x Eucalyptus urophylla S. T. Blake. Silviculture for Eucalyptus plantations. In: Congress Themes: C. Forests and Forest Products for a Greener Future. Resumos. Curitiba: 2019. p. 7.

MANZATO, C. L. Estado hídrico de mudas de Eucalyptus urophylla na fase de rustificação identificado por meio de espectroscopia de infravermelho próximo e médio. 87p. 2022. Tese (Doutorado em Ciência Florestal) – Universidade Estadual Paulista, Botucatu, 2022.

MENDONÇA, A. V. R.; RIBEIRO, L. G.; ASSUNÇÃO, J. R. A.; FREITAS, T. A. S.; SOUZA, J. S. Recipiente de fibras de Attalea funifera para produção de mudas de eucalipto. Pesquisa Florestal Brasileira. Colombo, v. 36, n. 87, p. 245-252, jul./set. 2016.

OLIVEIRA, D. P. F. Análise técnica e econômica do uso de recipiente degradável na produção de mudas de Eucalyptus urophyllax E. grandis. 84p. 2016. Dissertação (Mestrado em Ciência Florestal) - Faculdade de Ciências Agronômicas, Universidade Estadual Paulista, Botucatu, 2016.

R CORE TEAM. R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. Available in: https://www.R-project.org/. Accessed in: 27 Jan. 2023.

SANQUETTA, C. R.; BEHLING, A.; CORTE, A. P. D.; CADORI, G. C.; JUNIOR COSTA, S.; MACEDO, J. H. P. Eficiência de conversão da radiação fotossintética interceptada em fito massa de mudas de Eucalyptus dunii Maiden em função da densidade de plantas e do ambiente de cultivo. Scientia Forestalis, Piracicaba, v. 42, n. 104, p. 563-570, dez. 2014.

SEREGHETTI, G. C. Qualidade do plantio manual e mecanizado para eucalipto e pinus. 2016. Tese (Doutorado em Ciência Florestal) - Faculdade de Ciências Agronômicas, Universidade Estadual Paulista, Botucatu, 2016.

STORCK, E. B; SCHORN, L. A.; FENILLI, T. A. B. Crescimento e qualidade de mudas de Eucalyptus urophylla x Eucalyptus grandis em diferentes recipientes. Floresta, Curitiba, v. 46, n. 1, p. 39, jan. / mar. 2016.

TATAGIBA, S. D.; SILVA, A. G.; PENCHEL FILHO, R. M.; REIS, E. F.; RAMOS, K. A. Disponibilidade hídrica e doses de polímero hidrorretentor na produção de mudas clonais de eucalipto. Revista Engenharia na Agricultura, Viçosa, v. 27, n. 4, p. 359-369, jul. 2019.

WENDLING, I.; DUTRA, L. F. Produção de mudas de eucalipto por estaquia e miniestaquia. In: WENDLING, I.; DUTRA, L. F. Produção de mudas de eucalipto. 2ed. Colombo: Embrapa Florestas, 2017. p. 49-75.

Downloads

Published

2024-06-07

How to Cite

Cury, L. D., Silva, L. F. da, Oliveira, V. C. de, Arthur, M. de M., Rodrigues, S. A., Silva, J. M. S. da, & Guerra, S. P. S. (2024). Growth of <i>Eucalyptus urophylla</i> seedlings produced in conventional and water collection trays in degradable tube and polypropylene systems. Ciência Florestal, 34(2), e73734. https://doi.org/10.5902/1980509873734

Most read articles by the same author(s)