Electrodeposition and characterization of palladium nanostructures on stainless steel and application as hydrogen sensor
DOI:
https://doi.org/10.5902/2179460X20824Abstract
Palladium nanostructures have been deposited onto the stainless steel electrode by simple electrochemical deposition method in a buffer solution. The morphology of the synthesized Pd nanoparticles is controllable by deposition potentials because the driving force for various crystal growth mechanisms is merely dependent on applied potentials. The deposited Pd nanoparticles at higher applied potentials showed a cauliflower-like morphology with a nanoscale structure and large surface area. Then, an amperometric hydrogen sensor based on Pd nanoparticles can be constructed. This sensor is based on polymer electrolyte membrane fuel cell (PEMFC) and can be used at the ambient temperature. It is operated in the three-electrode mode that consists of three electrodes (working, counter and reference) and protonated Nafion membrane as proton conducting solid polymer electrolyte (SPE). The steady-state current response is obtained linearly to the concentrations of hydrogen from 50 to 2000 ppm, when a fixed potential of 0.2V is applied to the sensor. Typical factors that influence the performance of the sensor are analyzed and discussed. The simple and inexpensive hydrogen sensor fabricated shows low LOD (10 ppm, based on S/N = 3), wide linear range (50-2000 ppm) and short response time (10-40 s).Downloads
Downloads
Published
How to Cite
Issue
Section
License
To access the DECLARATION AND TRANSFER OF COPYRIGHT AUTHOR’S DECLARATION AND COPYRIGHT LICENSE click here.
Ethical Guidelines for Journal Publication
The Ciência e Natura journal is committed to ensuring ethics in publication and quality of articles.
Conformance to standards of ethical behavior is therefore expected of all parties involved: Authors, Editors, Reviewers, and the Publisher.
In particular,
Authors: Authors should present an objective discussion of the significance of research work as well as sufficient detail and references to permit others to replicate the experiments. Fraudulent or knowingly inaccurate statements constitute unethical behavior and are unacceptable. Review Articles should also be objective, comprehensive, and accurate accounts of the state of the art. The Authors should ensure that their work is entirely original works, and if the work and/or words of others have been used, this has been appropriately acknowledged. Plagiarism in all its forms constitutes unethical publishing behavior and is unacceptable. Submitting the same manuscript to more than one journal concurrently constitutes unethical publishing behavior and is unacceptable. Authors should not submit articles describing essentially the same research to more than one journal. The corresponding Author should ensure that there is a full consensus of all Co-authors in approving the final version of the paper and its submission for publication.
Editors: Editors should evaluate manuscripts exclusively on the basis of their academic merit. An Editor must not use unpublished information in the editor's own research without the express written consent of the Author. Editors should take reasonable responsive measures when ethical complaints have been presented concerning a submitted manuscript or published paper.
Reviewers: Any manuscripts received for review must be treated as confidential documents. Privileged information or ideas obtained through peer review must be kept confidential and not used for personal advantage. Reviewers should be conducted objectively, and observations should be formulated clearly with supporting arguments, so that Authors can use them for improving the paper. Any selected Reviewer who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should notify the Editor and excuse himself from the review process. Reviewers should not consider manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the papers.
