Chemical, physical and thermal characterization of wood pellets from different compositions
DOI:
https://doi.org/10.5902/2236117039197Schlagworte:
Pellets, Pinus ssp, Charcoal fines, Heating power, Gaseous emissionsAbstract
Pellets are characterized by renewable biomass and may be an option for replacing fossil fuels. The objective of this paper is to analyze and compare a set of pellets of different compositions, based on their physical, chemical and thermal characteristics for energy purposes, comparing them against international standards. To this end, the international standards SS187120 (Swedish), ONORM M7135 (Austrian), DIN 51731 (German) and the official standards recommended by the Pellets Fuel Institute (PFI) (United States) were used as reference for the parameters analyzed. Three types of pellets were analyzed: Pinus ssp. with 15% in mass of charcoal fines (P1), Pinus ssp. (P2) and Eucalyptus ssp. (P3). The analyses carried out indicated that the P1 pellets had the greatest higher heating value (20.52 MJ.kg-1). With regard to moisture content, mechanical durability and bulk density, all pellets achieved the quality parameters. Regarding the gaseous emissions of carbon monoxide (CO), some of the pellets presented values higher than the CONAMA standard. As for NOX emissions, they presented values below the standard and there were no emissions of SO2. Thus, it can be observed that the different types of pellets analyzed had a high energy potential according to the Austrian standard ONORM M7135.
Downloads
Literaturhinweise
ARRANZ, J. I.; MIRANDA, M.T.; MONTERO, I.; SEPÚLVEDA, F. J.; ROJAS, C. V. Characterization and combustion behaviour of commercial and experimental wood pellets in South West Europe. Fuel, v.142, p.199-207, 2015.
ARTEMIO, C. P.; MAGINOT, N. H.; SERAFÍN, C. U.; RAHIM, F. P.; GUADALUPE, R. Q.; FERMÍN, C. M. Physical, mechanical and energy characterization of wood pellets obtained from three common tropical species. Peer, 2018, 6.
BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS [Associação Brasileira de Normas Técnicas] - ABNT. NBR 14929. Wood - Determination of the moisture content of chips - Method for drying in an oven [Madeira - Determinação do teor de umidade de cavacos - Método por secagem em estufa]. Rio de Janeiro, 2003.
BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS [Associação Brasileira de Normas Técnicas] - ABNT. NBR 8112/86. Charcoal - Immediate Analysis [Carvão vegetal - Análise Imediata]. Rio de Janeiro, 1986.
BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS [Associação Brasileira de Normas Técnicas] - ABNT. NBR 8633/84. Charcoal - Determination of calorific value [Carvão vegetal - Determinação do poder calorífico]. Rio de Janeiro, 1984.
BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS [Associação Brasileira de Normas Técnicas] - ABNT. NBR 6922. Charcoal - Physical tests - Determination of specific mass - Bulk density [Carvão vegetal - Ensaios físicos - Determinação da massa específica - Densidade a granel]. Rio de Janeiro, 1981.
CAINENG, Z.; QUN, Z.; GUOSHENG, Z.; BO, X. Energy revolution: from a fossil energy era to a new energy era. Natural Gas Industry, v. 3, n.1, 1-10, 2016.
DENG, T.; ALZAHRANI, A.M.; BRADLEY, M.S. Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology,v.185. pp. 126-138, 2019.
DEUTSCHES INSTITUT FÜR NORMUNG - DIN 51731: Testing of solid fuels - Compressed untreated wood, Requirements and testing. Deutsches Institut für Normung (Ed.). Berlin, 1996.
FAOSTAT - Food and Agriculture Organization of the United Nations. 2017. Available online: http://www.fao.org/faostat/en/#country (accessed on 20 March 2019).
FERREIRA, P.T., FERREIRA, E. M.; TEIXEIRA, J.C. Analysis of industrial waste in wood pellets and co-combustion products, Waste Biomass Valorization, 2014, 637-650.
LEHMANN, B.; SCHRÖDER, H.W.; WOLLENBERG, R.; REPKE, J.U. Effect of Miscanthus addition and different grinding processes on the quality of wood pellets. Biomass and Bioenergy,v. 44, p.150-159, 2012.
LIU, Z.; JIANG, Z.; CAI, Z.; FEI, B.; YU, Y.; LIU, X. Effects of carbonization conditions on properties of bamboo pellets. Renewable Energy, v.51, p.1-6, 2013.
NATIONAL COUNCIL OF THE ENVIRONMENT - CONAMA. Gas emissions, resolution no. 490, of November 16, 2018.
OSTRREICHES NORMUNGS INSTITUT. ONORM M 7135. Compressed wood or compressed bark in natural state - Pellets and briquettes. Requirements and test specifications, Vienna, 2000.
PELLET FUEL INSTITUTE, Pellet Fuels Institute Standard Specification For Residential/Commercial Densified Fuel, Pellet Fuel Institute, Arlington, Va, USA, 2010.
SIKKEMA, R.; et al. The European wood pellet markets: current status and prospects for 2020. Biofuels, Bioproducts. Biorefining, v.5, n.3 p. 250-278, 2011.
SWEDISH STANDARDS. SS 187180: Biofuels and Peat - Determination of mechanical durability of pellets and briquettes, pellets. Classification Swedish Standards. Stockholm, 1999.
SOLID BIOFUELS -- Determination of mechanical durability of pellets and briquettes -- Part 1: Pellets (ISO 17831-2:2015).
TOSCANO , G.; RIVA, G.; PEDRETTI, E. F.; CORINALDESI, F.; MENGARELLI, C.; DUCA, D. Investigation on wood pellet quality and relationship between ash content and the most important chemical elements. Biomass and Bioenergy, v.56, p.317-322, 2013.
WU, M.R.; SCHOTT, D.L.; LODEWIJKS, G. Physical properties of solid biomass. Biomass and Bioenergy, v.35, n.5, p. 2093-2105, 2011.
Downloads
Veröffentlicht
Versionen
- 2022-08-01 (2)
- 2020-01-08 (1)
Zitationsvorschlag
Ausgabe
Rubrik
Lizenz
Copyright (c) 2020 Revista Eletrônica em Gestão, Educação e Tecnologia Ambiental
Dieses Werk steht unter der Lizenz Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International. DECLARATION
