Investigating the use of hybrid clones of Corymbia torelliana and Corymbia citriodora for the production of renewable bioreducers
DOI:
https://doi.org/10.5902/2236117084838Keywords:
Steel bioreducer, Renewable fuels, Sustainable steel industry, Charcoal qualityAbstract
Charcoal is of paramount importance in the steel industry, where it is used as a reductant and heat source in the combustion of iron ore and the production of pig iron. Research has been conducted to identify wood species that produce charcoal with superior physical, mechanical, and chemical characteristics compared to those currently used in the industry. This study aimed to characterize hybrid clones of Corymbia torelliana, Corymbia citriodora, and a clone of Eucalyptus urophylla at two final pyrolysis temperatures, 350°C and 550°C, to determine which is most suitable for use in the steel industry. Two hybrid clones of Corymbia torelliana and Corymbia citriodora and one clone of Eucalyptus urophylla were analyzed, with the latter serving as a comparison standard due to its prevalent use in charcoal production. The clones, seven years old and planted in Bom Despacho, Minas Gerais, Brazil, were subjected to laboratory pyrolysis at final temperatures of 350°C and 550°C, with a heating rate of 5°C.min-1. The lignin and extractive contents of the species were measured, along with the gravimetric yields of the charcoal produced. The clones were characterized for apparent density, chemical analysis, higher, lower, and useful calorific values, energy density, and scanning electron microscopy (SEM) images. The Corymbia citriodora clone, at a pyrolysis temperature of 350°C, produced the best charcoal for steelmaking, evidenced by its high fixed carbon content (65.24%), energy density (1.26 Gcal.m⁻³), and a visually observed reduction in cracks and fissures. The hybrid clone of Corymbia citriodora presents a promising alternative, offering rapid growth and qualities that are comparable or superior to species currently used in the industry.
Downloads
References
ABHI, T. D. et al. Challenges and Opportunities of Agricultural Biomass as a Replacement for PCI Coal in the Ironmaking Blast Furnace: A Review. Journal of Sustainable Metallurgy, v. 9, n. 3, p. 927–949, 2 set. 2023.
ASTM - AMERICAN SOCIETY FOR TESTING AND MATERIALS. D5057-17. Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste, 2017.
ASTM- AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM D1762-84: standard method for chemical analyses of wood charcoal. Philadelphia, 2021.
COSTA, L. J. et al. Physical–chemical properties and hygroscopicity of Brazilian metallurgical charcoal. Wood Science and Technology, v. 58, n. 2, p. 503–532, 1 mar. 2024.
COUTO, A. M. et al. Influence of physical-anatomical wood variables on charcoal physical–mechanical properties. Journal of Forestry Research, v. 34, n. 2, p. 531–538, 13 abr. 2023.
DA SILVA, L. F. et al. Kiln-Furnace System: Validation of a Technology for Producing Charcoal with Less Environmental Impact in Brazil. Forests, v. 15, n. 4, p. 645, 2 abr. 2024.
DE MEIRA, A. M. et al. Insights into the reuse of urban forestry wood waste for charcoal production. Clean Technologies and Environmental Policy, v. 23, n. 10, p. 2777–2787, 30 dez. 2021.
DIAS JUNIOR, A. F. et al. Investigating the pyrolysis temperature to define the use of charcoal. European Journal of Wood and Wood Products, v. 78, n. 1, p. 193–204, 1 jan. 2020.
DIN - Deutsches Institut fur Normung. DIN EN 14918: Determination of calorific value. Berlim: CEN, 2010. 63 p.
FIGUEIREDO, M. E. O. et al. Potencial da madeira de Pterogyne nitens Tul. (madeira-nova) para produção de carvão vegetal. Ciência Florestal, v. 28, n. 1, p. 420–431, 2 abr. 2018.
IAB. Statistical yearbook. Rio de Janeiro: Brazil Steel Databook, 2024.
IBÁ - Indústria Brasileira de Árvores. Annual Report 2023. Disponível em: https://www.iba.org/publicacoes. Acesso em: 10 ago. 2024.
LIMA, M. D. R. et al. Tachigali vulgaris energy forests: understanding spacing, age, and stem type effects on tree growth patterns and wood density. New Forests, v. 54, n. 3, p. 491–513, 5 maio 2023.
LOUREIRO, B. A. et al. Rendimento gravimétrico da carbonização e caracterização qualitativa do carvão vegetal em clones de híbridos de Corymbia spp. para uso industrial. Ciência Florestal, v. 31, n. 1, p. 214–232, 15 mar. 2021.
MASSUQUE, J. et al. Potential of charcoal from non-commercial Corymbia and Eucalyptus wood for use in the steel industry. Renewable Energy, v. 211, p. 179–187, jul. 2023.
MOUTINHO, V. H. P. et al. Characterization and statistical correlation between charcoal’s physical and mechanical properties of Eucalyptus and Corymbia clones. Ciência Florestal, v. 27, n. 3, p. 1095–1103, 31 ago. 2017.
OLIVEIRA, L. P. de. et al. Wood and charcoal quality in the selection of Eucalyptus spp. clones and Corymbia torelliana x Corymbia citriodora for steel industry. Revista Árvore, v. 47, 2023.
PEREIRA, A. K. S. et al. Perspectives and Challenges of World Charcoal Production in Technological, Social, and Climate Change Fields. Forest Science sustainable Processes and Wood Products. Scotts Roads: Springer, 2023. p. 1–23.
PROTÁSIO, T. de P. et al. Avaliação tecnológica do carvão vegetal da madeira de clones jovens de Eucalyptus grandis e Eucalyptus urophylla. Scientia Forestalis, v. 43, n. 108, 1 dez. 2015.
RAMOS, D. C. et al. Quality of Wood and Charcoal from Eucalyptus Clones for Metallurgical Use. Floresta e Ambiente, v. 26, n. spe2, 2019.
ROCHA, S. M. G. Qualidade da madeira de clones híbridos de Corymbia torelliana e Corymbia citriodora para produção de carvão vegetal siderúrgico. 2022. 87f. Tese (Doutorado em Ciências Florestais) - Programa de Pós-Graduação em Ciências Florestais, Centro de Ciências Agrárias, Universidade Federal do Espírito Santo, Jerônimo Monteiro, 2022.
SEN, P. K., ROY, G. G. Climate Change and Emission Reduction Pathways for a Large Capacity Coal-Based Steel Sector: Implementation Issues. Transactions of the Indian Institute of Metals, v. 75, n. 10, p. 2453–2464, 19 out. 2022.
SILVEIRA, J. H. da. et al. Characterization of residual biomass from the harvest of Eucalyptus saligna for thermal conversion processes. Revista Eletrônica em Gestão, Educação e Tecnologia Ambiental, v. 24, p. e13, 4 dez. 2020.
SINDIFER. Statistical Yearbook - Pig iron production in Minas Gerais and Brazil, Belo Horizonte: Union of the Iron Industry in the State of Minas Gerais, 2022.
TAPPI T257 om-85. Sampling and preparing wood for analysis. Atlanta: Tappi Press, 1985.
TAPPI T 264 cm-97. Preparation of wood for chemical analysis. Atlanta: Tappi Press, 1997.
TAPPI T 280 pm-99. Acetone extractives of wood and pulp. Atlanta: Tappi Press, 1999.
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
DECLARATION