MONITORING MOISTURE CONTENT IN Pinus elliottii Engelm. AND Eucalyptus grandis W. Hill ex Maiden WOODS, UNDER DIFFERENT DRYING TEMPERATURES, THROUGH THE ULTRASOUND

Authors

  • Leandro Calegari UFSM
  • Diego Martins Stangerlin
  • Elio José Santini
  • Clovis Roberto Haselein
  • Solon Jonas Longhi
  • Paulo Inácio Obregon do Carmo
  • Luiz Carlos Pinto da Silva Filho
  • Darci Alberto Gatto

DOI:

https://doi.org/10.5902/198050981971

Keywords:

wood drying, ultrasonic waves, drying control, drying temperature.

Abstract

With the purpose of evaluating the viability of use of ultrasonic technique to estimate the wood moisture content during the drying process, samples of Pinus elliottii Engelm. and Eucalyptus grandis W. Hill ex Maiden with dimensions of 3.5 cm thick, 10 cm width and 25 cm long were submitted to drying temperatures of 20, 40 and 70ºC. A PUNDIT ultrasonic equipment with plane face transducers by 50 KHz was used to measure sound velocity in the longitudinal direction of the wood. Results indicated increase of estimated ultrasonic speed with reduction of moisture content.  This relationship showed to be valid for the wood from green to the end of the drying process, and the best determination coefficients were found in the eucalypt wood (R² = 81%). Although no influence of the species in the ultrasonic speed has been observed, this one was influenced by the wood specific gravity and by the drying temperature. The effect of the specific mass was directly proportional for the pinus wood.  Opposite effect was observed in eucalypt wood. The ultrasonic speed tended to decrease as drying temperature increased for both species. Results suggest that this method presents good potential for the control of the drying process.

Downloads

Download data is not yet available.

References

BEKHTA, P.; NIEMZ, P.; KUCERA, L. The study of sound propagation in the wood-based composite materials. In: INTERNATIONAL SYMPOSIUM ON NONDESTRUCTIVE TESTING OF WOOD, 12., 2000, Suíça. Abstract… Suíça: Wood NDT, 2000. Disponível em: http://www.ndt.net/abstract/wood00/ data/3.htm. Acesso em: 10 set. 2005.

BRASHAW, B.K.; WANG, X.; ROSS, R.J. et al. Relationship between stress wave velocities of green and dry veneer. Forest Products Journal, Madison, v. 54, n. 6, p. 85-89, 2004.

BUCUR, V.; LANCELEUR, P.; ROGE, B. Acoustic properties of wood in tridimensional representation of slowness surfaces. Ultrasonics, v. 1 a 8, n. 40. p.537-541, 2002.

CARRASCO, E.V.M.; AZEVEDO JÚNIOR, A.P. Avaliação não-destrutiva de propriedades mecânicas de madeiras através de ultra-som - fundamentos físicos e resultados experimentais. Cerne, Lavras, v. 9, n. 2, p. 178-191, 2003.

COSTA, O.A.L. da. Velocidade de propagação de ultra-som na madeira para diferentes condições de umidade. Campinas: UNICAMP, 2004. 47p. (Relatório de pesquisa)

DYK, H.V.; RICE, R.W. Ultrasonic wave velocity as a moisture indicator in frozen and unfrozen lumber. Forest Products Journal, Madison, v.55, n.6, p. 68-72, 2005.

FEENEY, F.E.; CHIVERS, R.C.; EVERTSEN, J.A. et al. The influence of inhomogeneity on the propagation of ultrasound in wood. Ultrasonics, v. 36, n. 1/5, p. 449-453, 1998.

GONÇALVES, R.; COSTA, O.A.L. Acompanhamento da secagem da madeira de pinus, eucalipto e embuia utilizando ultra-som. In: CONGRESSO IBERO-AMERICANO DE PESQUISA E DESENVOLVIMENTO DE PRODUTOS FLORESTAIS, 2., 2002, Curitiba. Anais... Curitiba: UFPR. p. 1-10, 2002. 1 CD-ROM.

GREEN, D.W.; EVANS, J.W.; LOGAN, J. D. et al. Adjusting modulus of elasticity for changes in temperature. Forest Products Journal, Madison, v. 49, n. 10, p. 82-94, 1999.

GRUNDSTRÖM, F. Non-destructive testing of particleboard with sound and eigen frequency methods. 1998. 60f. Dissertação (Mestrado em Engenharia Mecânica) - Luleå University of Technology, Skellefteå, 1998.

OLIVEIRA, F.G.R. de; CANDIAN, M; LUCCHETTE, F.F. et al. Moisture content effect on ultrasonic velocity in Goupia glabra. Materials Research, v. 8, n.1, p. 11-14, 2005.

OLIVEIRA, F.G.R. de; SALES, A. Relationship between density and ultrasonic velocity in Brazilian tropical woods. Bioresource Technology, v. 97, p. 2443-2446, 2006.

PUCCINI, C.T. Avaliação de aspectos de qualidade da madeira utilizando o ultra-som. 2002. 139f. Tese (Doutorado em Engenharia Agrícola) - Universidade Estadual de Campinas, Campinas, 2002.

SANTINI, E.J. Alternativas para monitoramento e controle do processo de secagem de madeira serrada em estufa. 1996. 198f. Tese (Doutorado em Ciências Florestais) - Universidade Federal do Paraná, Curitiba, 1996.

SMITH, A.W. The Elements of Physics. 3. ed. New York and London: McGraw McGraw-Hill, 1932.

SHIMOYAMA, V.R. de S. Estimativas de propriedades da madeira de Pinus taeda através do método não-destrutivo emissão de ondas de tensão, visando à geração de produtos de alto valor agregado. 2005. 151f. Tese (Doutorado em Ciências Florestais) - Universidade Federal do Paraná, Curitiba, 2005.

SIMPSON, W.T. Relationship between speed of sound and moisture content of red oak and hard maple during drying. Wood and Fiber Science, Madison, v.30, n.4, p.405-413, 1998.

SKAAR, C. Water in wood. New York: Syracuse University Press, 1972.

WANG, S.Y.; LIN, C.J.; CHIU, C.M. The adjusted dynamic modulus of elasticity above the fiber saturation point in Taiwania plantation wood by ultrasonic-wave measurement. Holzforschung, Berlin, v. 57, n. 5, p.547-552, 2003.

Published

2007-12-30

How to Cite

Calegari, L., Stangerlin, D. M., Santini, E. J., Haselein, C. R., Longhi, S. J., Carmo, P. I. O. do, Filho, L. C. P. da S., & Gatto, D. A. (2007). MONITORING MOISTURE CONTENT IN Pinus elliottii Engelm. AND Eucalyptus grandis W. Hill ex Maiden WOODS, UNDER DIFFERENT DRYING TEMPERATURES, THROUGH THE ULTRASOUND. Ciência Florestal, 17(4), 399–408. https://doi.org/10.5902/198050981971

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 4 5 6 7 8 9 10 > >>